Latest Post

Regardless of the number of products in your skincare routine, if you’re not a dermatologist or expert, figuring out how to actually make sure all of these products work involves a little bit of research. Daily skincare routines include several steps, and it can be a little confusing as to what goes on top of what and which ingredients shouldn’t be applied together.

We’re demystifying the proper steps and applications of various products and giving a few basic no-nos when it comes to combining certain ingredients, but we urge you to be mindful of the active ingredients in the products you already own. Should your hydrating serum and vitamin C serum be applied together? Well, that depends on their main ingredients. This article will help you know what to look out for.

 

Meet the expert
Dr. Cynthia Bailey M.D.
BOARD-CERTIFIED DERMATOLOGIST, FOUNDER OF DR. BAILEY SKIN CARE
Dr. Cynthia Bailey is a practicing board-certified dermatologist based in California and the founder of Dr. Bailey Skin Care. She focuses on skincare routines, skin issues, and more.

 

The Basics

Why is how you layer your skincare even important? It all comes down to absorption. “Layering your skin products in the right order helps you get the most out of your routine; you want maximal percutaneous absorption of important active ingredients,” said Cynthia Bailey, M.D., board certified dermatologist and founder of Dr. Bailey Skin Care. “Applying a product that blocks others from getting through your skin will be a frustrating waste of time and money.”

When it comes to the proper order of application of products, you typically want to go from thin to thick. “Always apply water-based products before oil-based products and try to layer thinner texture water-based products before thicker/creamier/oily containing products,” Dr. Bailey said. The viscosity of your products determines how they’re absorbed into your skin. If you apply a watery serum after you’ve already layered on a cream or lotion, you are not receiving the full benefits of the thinner product because it’s not able to penetrate the skin with something else so thick underneath. This foundational principle has some exceptions that we’ll cover, namely when it comes to eye creams, eye serums, and retinol.

The proper application of products also differs between night and day applications, as you won’t be using the same products each time. “Ideally you want a twice-a-day AM/PM skincare routine separated by about 12 hours or so,” Dr. Bailey added. While some products are best applied at night (like retinol) or in the morning (antioxidants like vitamin C), your routine will generally look similar, always starting with cleanser. 

According to Dr. Bailey, the proper skincare routine involves: 

  1. Cleanser
  2. Correcting products (like retinol, AHA/BHA, and other products meant to improve current skin issues)
  3. Hydrating products (serums and moisturizer)
  4. Protecting products (sunscreen)

Here, we’re breaking down just how to organize your routine. 

 

Source: Danielle Moss

 

What Order to Apply Your Skincare Products in the Morning

 

Step 1: Oil Cleanser

Note that if you aren’t using a facial oil in your nighttime routine, then oil cleansing in the morning isn’t always necessary. However, if you have dry skin, using an oil cleanser instead of a gel or milky cleanser in the morning might be a better alternative. It will hydrate your skin while getting rid of any products or sweat from the night before.

 

 

Step 2: Micellar Water

Cleanse with either a water-based cleanser or do a micellar water rinse by saturating a cotton pad with pure micellar water and sweeping it all over your face and neck.

 

 

Step 3: Hydrating Toner and Essences

To keep your skin supple and hydrated, use a hydrating toner or essence while your skin is still damp from the micellar water. The key to a hydrated, plump complexion is layers of moisture, so we’ll start with this step: Apply your toner or essence with your hands and pat it into the skin. 

 

Step 4: Treatment Serums and Ampoules

The typical treatment serum used in daytime skincare is a vitamin C serum, but no matter what types of serums you use, just make sure that the most potent active ingredient goes on first. To save time, I’d recommend a Vitamin C serum combined with hyaluronic acid so you don’t have to spend time layering in the early morning. But if you do choose to layer serums, always apply the hydrating serum after the treatment serum.

 

 

Step 5: Eye Cream or Eye Serums

The skin under your eyes is the thinnest on your face, so your eye-specific products need to go on before any heavier moisturizers.

 

Step 6: Moisturizer

There’s no such thing as skin that’s too moisturized, but if you struggle with heavy moisturizer under makeup, consider a gel consistency or a light lotion.

 

Step 7: SPF

“Sunscreen typically sits on top of your skin or penetrates just into the superficial layers of dead cells,” Dr. Bailey said. This is why you always finish your routine with sunscreen between 30 and 50 SPF. Look for a milky essence consistency or a serum style sunscreen to avoid white cast or caking makeup.

Black Girl Sunscreen

Sunscreen Lotion SPF 30

 

Source: Lunya

 

What Order to Apply Your Skincare Products at Night

For nighttime skincare, you need to consider whether or not you want to incorporate a retinol in your routine. Retinol can be a little daunting, so read our full rundown on it here. Nighttime skincare is the time for more serious treatments like retinol and other photosensitizing AHAs like glycolic and lactic acids because a lot of these active ingredients break down in sunlight.

If you want to use both an AHA and retinol, it’s best to alternate their application. Use retinol one night and your AHA the next, and so on, but be careful and go slow because these ingredients are known to cause irritation when you first start them. A typical nighttime skincare routine will look relatively similar to a daytime routine with a few minor tweaks.

 

Step 1: Oil Cleanser

An oil cleanser is always necessary at night, as you will be removing makeup, SPF, environmental pollutants, and the sebum your skin produced during the day. You can use an oil cleanser or a cleansing balm depending on your preferences. 

Good Molecules

Cleansing Balm

 

Step 2: Gel or Milky Cleanser

To make sure all of the oily residue from your cleansing oil/balm is removed and that your skin is totally clear of makeup, dirt, and oil, opt for a gel or milky cleanser. Gel is great for combination/oily skin or acne-prone skin, while a milky cleanser will clean skin without stripping away all of the moisture on dry skin types. 

 

Step 3: Hydrating Toner or Liquid Exfoliator

You can use the same toner or essence you used in the morning to hydrate your skin and prepare it for any of the harsh acid ingredients or retinoids you might use next. You can also use a liquid exfoliant with AHA or BHA during this step. Make sure to not use any other acids in your evening routine and follow this step with a hydrating moisturizer.

 

Step 4: AHA/BHA or Retinol

If you used an exfoliator in the last step, skip this one. This is where retinol and AHAs start to come into play. Using AHAs and BHAs at the same time as retinol can be irritating depending on your skin type, so we recommend alternating nights or using AHA/BHA products in the morning and retinol at night to limit irritation. If you aren’t using retinol, this is where you might opt for a glycolic or lactic acid serum or mask that will exfoliate your skin overnight. If retinol is a little too strong for your skin, try a bakuchiol product instead. Always wait until skin is completely dry before applying retinol—usually wait about 20 minutes and then allow your retinol product to fully absorb before moving on.

If you’re worried about mixing acids yourself, opt for a product that’s already done the ratio for you. 

Shani Darden Skincare

Retinol Reform

 

Step 5: Eye Cream

Opt for a heavier formula for nighttime use that focuses on moisturizing and treating the undereye.

 

Step 6: Moisturizer

“Look for moisturizing creams with ingredients that support your skin barrier such as squalane, ceramides, lipids (oils), glycerin in a cream base matched to your skin type,” Dr. Bailey explained. “This helps to ‘seal the deal’ over your correcting products and helps protect skin from barrier breakdown (irritant dermatitis) and prevent trans-epidermal water loss.” If you have oily skin, you can opt for an oil-free moisturizer (similar to what you used in the daytime), whereas those with dry skin might need a thicker product before bed.

 

Step 7: Sleeping Mask

Sleeping masks help create a barrier to seal in all of your products and keep your skin optimally hydrated throughout the night. If you like to use a facial oil at night, this would be the step to add it in as well. 

Summer Fridays

Jet Lag Mask

 

Step 8: Spot Treatment

If you have any active breakouts, this is when you would apply a spot treatment or a pimple patch (our editors’ favorite way to get rid of a pesky zit). Do not apply any other skincare over a spot treatment, especially retinol.

 

Source: Kalos Skincare | Unsplash

 

What Skincare Ingredients to Use Together and Which to Avoid

When you begin to combine the skincare you already own with new things you want to purchase, you need to be careful about which active ingredients you are layering together. Always check to see what the main ingredients in your products are to avoid irritation.

 

The Don’ts

 

Retinol + Glycolic Acid = No… or maybe!

If you have sensitive or reactive skin, these two can be problematic when layered together. If you’re going to use any AHA alongside retinol, be sure to start slow to avoid redness and peeling. Opt for a product that combines small percentages of AHA/BHA with retinol already in the formula.

 

Retinol + Vitamin C = NO! 

It’s often debated as to whether or not the pH of L-ascorbic acid destabilizes retinol and therefore renders it ineffective—so far the jury is still out. However, since retinol makes you more sensitive to sunlight and vitamin C is best worn during the day, it’s best to keep these two separate by applying vitamin C in the morning and retinol at night.

 

Retinol + Benzoyl Peroxide = NO!

This is a combination Dr. Bailey warned against because it can cause dryness and irritation, and the two products can deactivate each other if used together, making them less effective. Retinol is used as an acne treatment (particularly in prescription formulas like tretinoin), but it doesn’t play well with the actives in spot treatments, so be careful if you need to use both. Remember, putting retinol on an active breakout will do nothing to cure it, as retinol works on the deeper layers of skin. Retinol is never to be used as a spot treatment! 

 

Benzoyl Peroxide + AHAs = NO!

These are two exfoliators from different ends of the spectrum, so be careful when combining them, as it’s very easy to stress out your skin by over-exfoliating.

 

Source: Mathilde Langevin | Unsplash

 

The Dos

 

Benzoyl Peroxide + Salicylic Acid = Yes, sometimes. 

For acne-prone skin, using these two together once a week can work wonders on active breakouts or congested pores. If you’re not experiencing either, it’s best to leave these two alone.

 

Vitamin C + Peptides = Yes!

These two go together like champagne and OJ. Peptides are kind of like the hype man of skincare: They’re not that special on their own, but they really rev up the effectiveness of other active ingredients. These short-chain amino acids are the building blocks of the protein that creates collagen and elastin, and they really love antioxidants like vitamin C.

 

Vitamin C + SPF = Yes!

You have to have sun protection during the day—that’s a given—but your SPF does nothing to protect you from environmental pollution and heat-activated free radicals. For this, you need an effective antioxidant like vitamin C.

 

Retinol + Hyaluronic Acid = Yes!

You should always replenish moisture after applying retinol, hence why retinol and hyaluronic acid are a dynamic duo in your skincare routine.

 

I Constantly Get Compliments on My Skin—These are the 3 Products I Recommend to Everyone
READ MORE
I Asked a Dermatologist to Makeover My Skincare Routine—This Is What She Changed
READ MORE
 

The post The Correct Order to Apply Your Skincare Products appeared first on The Everygirl.

Everyone’s seen the Instagram and Pinterest pictures of women with gorgeous, long curled locks. You spend an hour (or more) in front of the mirror, twirling a scalding hot iron around your head, creating the perfect curls that will hopefully brush out to the messy waves of your dreams. Then, after all that time, your hair falls flat before you even walk into the restaurant and you’re left wondering: why won’t my hair hold curls? Womp womp.

I’ve always had very fine hair that refuses to hold a curl. I did beauty pageants as a child (#nbd), and my grandma used to have to curl my hair and put it in sponge rollers for them to stay long enough to last the duration of the pageant. No one has time for that, but I also know that my lifeless curls need some revision stat.

So, why exactly does our hair lose shape so quickly? I went on a mission to figure out what I was doing wrong (self-awareness is key), and yeah, it was a lot. This is what I’ve learned from my mistakes!

 

 

You’re not using the right tools

There’s more to curling your hair than the old curling iron your mom gave you freshman year of high school for the homecoming dance. Upgrade your iron to something higher quality with ceramic plates that heat equally all the way through—this way your curls are the same size all the way through. A lot of people think that their irons need to get super hot to get the best curls. If you have very thick hair, you’ll want a higher heat than someone with finer or thinner hair; however, you shouldn’t need an iron with anything over 300 degrees, and make sure your iron is never set above 400 degrees.

Pay attention to the size of the barrel. Short hair would benefit from a thinner barrel because you can wrap your hair around the barrel more times and it forces you to use smaller sections. People often think you need a large wand to do tousled waves. I’m not telling you what to do, but using a smaller barrel will make the curls tighter from the start so they fall throughout the day.

Also, don’t discriminate against curling irons! You can use a wand, an iron with a clip, or even a flat iron to create waves.

 

Shop some of our favorites:

 

Source: Getty Images

 

You’re not properly prepping your hair

The prep is almost as important as the actual work of curling your hair! One trick to getting your curls to last is using a product with hold before you put the iron on your hair. Whether it’s a moose, a heat protectant, a hair spray, or a dry texture spray, your hair will already be prepared to hold onto the curl.  I love dry texture spray instead of hair spray because it gives your hair some grit which allows it to stick to the iron rather than sliding off and adds a nice messy texture. 

If you have the money and are trying to get curls for a big event, consider adding extensions! Not only does this add length and tons of volume, but it also adds a different hair texture to the mix. This gives your curl more bounce.

 

Source: Getty Images

 

You’re not sectioning your hair

If you have a lot of hair, you need to section. Not sectioning makes it easy to miss pieces, which makes your hair look flat even when it’s not. Don’t be afraid to go all-in with your sectioning.

Especially if you’re using a small barrel, large sections of hair won’t get the same amount of heat across the iron, so make sure your sections are no larger than an inch.

 

You’re curling from the bottom to the top

When you curl from the bottom to the top, the bottom of your hair is getting most of the heat. This means your curls are the tightest at the bottom, which weighs down the hair closest to the scalp and makes the curls fall faster. This trick is especially important if you’re using a curling iron with a clamp.

This technique also comes in handy if you’re using a curling wand that tapers at the bottom. If the bottom of the barrel is thinner than the top, your ends are getting a tighter curl than the hair at the root. This creates a beautiful wave; however, it also tends to fall faster than a curling iron that is all the same size. You could opt to purchase a different curling iron or make do with what you have and place the entire section of hair onto the bottom of the barrel.

 

Source: Getty Images

 

You aren’t holding the curls in place

Curls aren’t set until they cool, so while they’re still hot, pin them to your head. You can use bobby pins or clips. If you really need them to stay, spray your hair while they’re setting!

 

Your hair is too clean

Clean hair just doesn’t have the grit and hold as hair with a little oil in it. Curls work best on second or even third-day hair. If you need to be clean, you can add dry shampoo to your hair before you curl to give it some texture and volume.

 

You’re brushing out your curls

Of course, no one’s walking out of the house in pageant curls; however, you don’t need to use a brush to get the bounciness out of your curls! A brush pulls the curl down too much, whereas using a wide-tooth comb or just your fingers pulls them apart without overdoing it. I also recommend flipping your head over just after you finish curling and shaking the curls out at the root of your hair. Not only does this add serious volume, but it gives your curls some piecyness. My favorite trick for messy, undone curls!

Make sure to spray them with hairspray or dry texture spray before you brush them out so the hold stays.

 

How to Curl Your Hair With a Curling Iron and a Straightener
READ MORE

 

The post Can’t Get Your Hair to Hold a Curl? Here’s What to Do appeared first on The Everygirl.

Author Name

Contact Form

Name

Email *

Message *